Spraying lays primer and topcoat down in thin, even coats that level out smooth, with no roller texture and no brush lines. Cabinet painting done this way looks close to a factory finish and lasts longer at the handles.
Spraying matters most on the flat MDF doors that fill so many Willowdale custom kitchens. A slab door shows every brush stroke under pot lights, while a sprayed slab door reads as one clean surface.
Thin sprayed coats bond and harden better than thick brushed ones. A brush leaves ridges where paint pools, and those ridges stay soft longer and chip sooner. Spraying lays an even film everywhere, so sprayed cabinet painting resists wear around handles and along drawer edges.
Between coats, a fine scuff removes specks and gives grip. That step removes dust specks and gives the next coat a surface to grip.
Flat slab doors are the hardest surface to brush and the easiest to spray. With no panel or profile to break up the light, every brush line and roller dimple shows, especially under pot lights or beside a large window.
Because a flat door conceals nothing, cabinet painting here begins by filling each chip and sanding every face with care. Then primer and topcoat are sprayed in even passes from edge to edge. The result is a surface that looks like it came from a factory.
Many Willowdale custom kitchens have flat MDF doors from floor to ceiling, plus matching fridge panels and dishwasher panels. We spray all of the panels together so the sheen matches across the whole wall. Owners moving from a high-gloss finish usually choose satin, which is kinder to small dents and fingerprints.
Fronts get coated inside our booth, where filtered air protects wet coats from dust and heat holds at a constant level. The doors lie flat, so the coating levels evenly before it sets.
Boxes, frames and gables are screwed to the wall, so they get coated where they stand. Plastic goes up across the room, counters and floors are protected, and an extraction fan runs the whole time. Other rooms remain untouched and in normal use.
Wall paint stays too soft for cabinets. Our cabinet painting uses one of two products: a water-based alkyd enamel that levels nicely and can be mixed in almost any colour, or a catalysed polyurethane that cures much harder.
Both are low in odour and suited to occupied homes. Deep colours, high-traffic kitchens and a tight timeline often point to the two-part product. Your quote names the one we will use on your kitchen.
Toronto summers are humid, and damp air slows how fast a water-based finish dries and cures. During the muggiest stretches of July and August, coats applied on site get longer gaps.
In winter, a furnace-dried house speeds up drying, but we keep the space warm enough for the coating to flow and bond. Your cabinet painting timeline reflects the season you book, and you hear about it before we start.
Every kitchen we do gets sprayed cabinet painting, so cost depends on the room itself rather than on technique. Typical Willowdale kitchens come in from $2,800 up to $6,000, with big custom rooms above that band and condo galleys below it.
A two-part polyurethane costs a little more than a water-based enamel, and a high-gloss finish costs more than satin because it needs extra sanding. Product, sheen level and coat count all appear on your written cabinet painting quote.
We count every door and box, check the surface and write a quote that names the primer, topcoat and number of coats. Call +1 (647) 370-5454, send us a message, or return to the Willowdale cabinet painting home page. Big kitchens with many doors are covered on the infill home cabinet painting page.
Condo vanities, pantry walls, laundry closets and custom built-ins are primed and topcoated with the kitchen system.
Each front is degreased, scuffed and primed according to its material, then sprayed with a durable topcoat and rehung. With kitchen cabinet painting the whole room gets a new colour, while stone, faucet and tile stay untouched.
See Kitchen Cabinets
The custom homes that replaced Willowdale's bungalows hold some of the largest kitchens in Toronto, often with 50 or more doors in lacquer, polyester or painted MDF. Cabinet painting refreshes those kitchens for a fraction of what new custom millwork costs.
See Infill Homes
Before oak takes colour, it needs a tannin-sealing primer and a firm decision on what happens to its open pores. Handled in that sequence, oak cabinet painting ends up even, smooth and free of brown bleed.
See Oak Cabinets
Certain wood kitchens deserve restoring rather than covering, so refinishing removes the tired finish, shifts the stain tone where needed, and protects the timber with a sprayed clear coat. When the timber is handsome enough to keep on view, it replaces paint altogether.
See Refinishing
Shiny factory finishes will accept colour, provided an adhesion primer goes first and the surface remains firmly stuck to its core. Before any thermofoil, melamine or laminate cabinet painting, we inspect each door one by one.
See Thermofoil and Melamine
New doors and drawer fronts can go onto the boxes you already have, sprayed in the same colour as the frames. Think of it as the step between cabinet painting and a complete tear-out.
See Refacing and New Doors
Two-tone means pale wall runs matched with a deeper island or deeper base cabinets, and no cabinet painting layout is asked for more often today. An island can also be painted alone to give an older kitchen a new focus.
See Two-Tone and Islands
No cabinet painting booking is smaller than a bathroom vanity, which most often wraps up within two days. Steam and splashing mean it needs a hard topcoat and a full cure before heavy cleaning.
See Bathroom Vanities
Condo kitchens are small, but building rules, elevator bookings and shared air make the planning bigger than the job. With condo kitchen cabinet work, fronts leave the unit, so daily life inside carries on.
See Condo Kitchens
Pantries, laundry cupboards, mudroom lockers and fitted units receive the primer and topcoat a kitchen would. These units are anchored, so we do the job where they stand, inside sealed sheeting.
See Pantries and Built-Ins
Fresh handles and quiet-closing hinges complete a painted kitchen, and fitting them is easiest when the fronts are down anyway. Unused holes get plugged, new ones are bored off a jig, and hardware goes on after the cabinet painting has hardened.
See Hardware and Hinges
A full door finished in the shade and propped in your kitchen settles what a tiny chip never will. Cabinet painting colour consultation lets you judge true colour on your actual cabinetry, under your actual lighting, before deciding.
See Colour ConsultationA visit covers the door tally, the material check and a written scope. There is no fee for the visit or the quote.
List what you know about the cabinets, house or suite. We phone back to pick a time and need only a name and number. Or reach us directly at +1 (647) 370-5454.
